Welded in elements in the peak connector has been replaces with horizontal tubes (diameter ab. 38mm) and vertical tubes which make a cross. This solution enhanced the reliability of the construction.
The standard feet have been replaced by the big rectangle one, with the enhanced degree of support (dimensions: 30 by 30 centimeters) and corner feet (dimensions 30 by 40 centimeters). The feet are equipped with 4 anchoring holes.
We use thick tubes (diameter ab. 78mm) which are protected from corrosion by hot dip galvanizing. The tents middle connectors are ab. 78mm wide in diameter.
The construction in our marquees is connected with the most reliable method - through and through screws.
The constructions which uses click metod of assembly or tightening screws which are not through and through, are not assembled safely or durably.
The tent 8m x28m 3m is composed of tents: 8x8m, 8x12m.
Double ventilators with shutters placed on both sides of the roof allow proper air flow inside the tent. They prevent the creation of sauna effect and water condensation.
Only the tent with the upper ventilators on both sides ensure a proper air flow.
The increased width of the retention apron increases the efficiency of water discharge. This ensures that the inner part of the tent stays dry during the rain.
The side walls and the entrances are made of a fire resistant material. It does meet the EN 13501 standard. It increases the safety of use of the tent significantly.
Size and weight | |
---|---|
Width: | 8m |
Lenght: | 28m |
Sections: | 2m |
Height of the side wall: | 3m |
Height of the peak: | 5,12m |
Area: | 224m2 |
Volume: | 909,20m3 |
The construction assembly manual: | Download |
Tarpaulin | |
---|---|
Tarpaulin: | PVC |
Roof tarpaulin: | ab. 720 g/m2 |
Side tarpaulin: | ab. 720 g/m2 |
Air-Control System: | YES |
Hermetic System: | YES |
Floor Skirt: | YES |
Multi-Size System: | YES |
Entry no. 1 - Entry F72: | ab. Wight 4,9m x Height3,34m |
Entry no. 2 - Entry F72: | ab. Wight 4,9m x Height3,34m |
Construction | |
---|---|
Tube diameter: | ab. 78mm |
Tube thickness: | ab. 1,6mm |
Connector diameter: | ab. 78mm |
Connector thickness: | ab. 1,7mm |
Tent feet: | ab. 30cm |