The tent is equipped with a modern-designed gate which can be rolled up or down with ease WITH A STRING. The entrance in our tents is HIGHER than side wall and it is more practical to use - it requires only ONE PERSON. This model is equipped with SECOND QUICK DOOR which allows to use the tent efficiently.
The entrance gate in the tents of our competition is hand-rolled up. It requires minimum TWO PEOPLE to open it. They offer LOWER ENTRANCE than the height of the side wall; the rolled up tarpaulin takes additional space.
By eliminating lower pipes at the entrances, the tent has become even much more practical. Two thick pipes were added on each entrance so that the tent has become stronger. These pipes stiffen the entrances and prevent canvas cover at the entrance from damage.
Additional construction consists of a lower frame, the upper reinforcements and horizontal and vertical braces of the roof. This solution provides greater load capacity and rigidity of the structure. It also allows the use of a tent during unfavourable weather conditions.
In peak connectors, welded parts have been replaced by horizontal ab. fi 25 mm pipes, which have considerably increased the reliability of the construction. In the new model, the horizontal pipe has been attached to the lower part of the connector to provide greater rigidity of the structure.
We use the most reliable method of connecting the pipes with bolts passing through in our tents. This is the only reliable way of connecting elements.
Tents with snaps or with bolts screwed in and NOT passing through, do not provide safe and permanent installation!
Thick, steel pipes with a fi diameter of ab. 50mm are protected against corrosion by galvanizing. Tent connectors have fi diameter of ab. 54 mm.
Standard feet of fi 9 cm have been increased by 55%. The new fi 14 cm rate increases stability of the tent and simplifies its assembly.
The tent 5m x26m 2m is composed of tents: 5x8m, 5x10m.
Double ventilators with shutters placed on both sides of the roof allow proper air flow inside the tent. They prevent the creation of sauna effect and water condensation.
Only the tent with the upper ventilators on both sides ensure a proper air flow.
The increased width of the retention apron increases the efficiency of water discharge. This ensures that the inner part of the tent stays dry during the rain.
The side walls and the entrances are made of a fire resistant material. It does meet the EN 13501 standard. It increases the safety of use of the tent significantly.
Size and weight | |
---|---|
Width: | 5m |
Lenght: | 26m |
Sections: | 2m |
Height of the side wall: | 2m |
Height of the peak: | 2,91m |
Area: | 130m2 |
Volume: | 319,15m3 |
The construction assembly manual: | Download |
The roof assembly manual: | Download |
Tarpaulin | |
---|---|
Tarpaulin: | PVC |
Roof tarpaulin: | ab. 600 g/m2 |
Side tarpaulin: | ab. 600 g/m2 |
Air-Control System: | YES |
Hermetic System: | YES |
Floor Skirt: | YES |
Multi-Size System: | YES |
Entry no. 1 - Entry SFR: | ab. Wight 2,33m x Height2,1m |
Entry no. 2 - Entry SFR: | ab. Wight 2,33m x Height2,1m |
Construction | |
---|---|
Tube diameter: | ab. 50mm |
Tube thickness: | ab. 1,6mm |
Connector diameter: | ab. 54mm |
Connector thickness: | ab. 1,7mm |
Tent feet: | ab. 14cm |
Additional construction: | YES |
Easy Up & Down System: | YES |