Our tents have the innovative COURTAIN-TYPE entrance. The tarpaulin slides apart which makes it a comfortable opening system which only requires ONE PERSON. The new system allowed us to create the HIGHER ENTRANCE.
The entrance gate in the tents of our competition is hand-rolled up. It requires LADDERS and minimum of TWO PEOPLE to open it. They offer LOWER ENTRANCE than the height of the side wall; the rolled up tarpaulin takes additional space.
By eliminating lower pipes at the entrances, the tent has become even much more practical. Two thick pipes were added on each entrance so that the tent has become stronger. These pipes stiffen the entrances and prevent canvas cover at the entrance from damage.
Additional construction consists of a lower frame, the upper reinforcements and horizontal and vertical braces of the roof. This solution provides greater load capacity and rigidity of the structure. It also allows the use of a tent during unfavourable weather conditions.
In peak connectors, welded parts have been replaced by horizontal ab. fi 25 mm pipes, which have considerably increased the reliability of the construction. In the new model, the horizontal pipe has been attached to the lower part of the connector to provide greater rigidity of the structure.
Thick, steel pipes with a fi diameter of ab. 50mm are protected against corrosion by galvanizing. Tent connectors have fi diameter of ab. 54 mm.
Standard feet of fi 9 cm have been increased by 55%. The new fi 14 cm rate increases stability of the tent and simplifies its assembly.
We use the most accurate method of connecting pipes with screws passing through in our tents. This is the only reliable way of connecting elements. In addition, the legs lifting the structure are connected using double screws.
Tents with snaps or with the screws that do NOT pass through, do not provide safe and permanent installation!
The additional Velcro secures the heat inside the tent and provides aesthetic look of it. They make the walls perfectly fit together, forming a coherent whole. Moreover, it prevents dust, rain and snow from entering the tent.
The increased width of the retention cloak increases the efficiency of water discharge. This ensures that the inner part of the tent stays dry during the rain.
Double ventilators with shutters placed on both sides of the roof allow proper air flow inside the tent. They prevent the creation of sauna effect and water condensation.
Only the tent with the upper ventilators on both sides ensure a proper air flow.
The side wall is made of thick PVC ab. 500 g/m2 canvas cover and a large leaded windows. The basic wall is 2m high. Its unique design allows to add 1m or 0.5m to the side wall easily. With the windows placed on each two-meter segment, the tent looks aesthetically. It will be perfect as a trade, exhibition or a party tent.
Fastened Velcro strengthened entrances and improved their appearance. Thanks to them, zippers have additional protection against gusty wind. Velcro also make the canvas cover tightened.
Side canvas is mounted on the tab. This is made to strengthen the entire plating.Thanks to Overlap system, when one element is broken, you do not need to replace the entire canvas, all you need is to buy the damaged segment.
2 meter wide side walls are fixed on the special elastic bands which allows to adjust the tent to your needs.
Example arrangement for the tent size 6m x 8m
Size and weight | |
---|---|
Width: | 5m |
Lenght: | 27m |
Sections: | 2m |
Height of the side wall: | 3m |
Height of the peak: | 3,91m |
Area: | 135m2 |
Volume: | 466,42m3 |
The construction assembly manual: | Download |
The roof assembly manual: | Download |
Tarpaulin | |
---|---|
Tarpaulin: | PVC |
Roof tarpaulin: | ab. 580 g/m2 |
Side tarpaulin: | ab. 500 g/m2 |
Air-Control System: | YES |
Hermetic System: | YES |
Floor Skirt: | YES |
Multi-Size System: | YES |
Entry no. 1 - Curtain entrance: | ab. Wight 2,33m x Height3,31m |
Entry no. 2 - Curtain entrance: | ab. Wight 2,33m x Height3,31m |
Construction | |
---|---|
Tube diameter: | ab. 50mm |
Tube thickness: | ab. 1,6mm |
Connector diameter: | ab. 54mm |
Connector thickness: | ab. 1,7mm |
Tent feet: | ab. 14cm |
Additional construction: | YES |
Easy Up & Down System: | YES |
On all side walls, additional, lateral, upper and lower cantilevers can be used. Thanks to them, the tent is protected against stronger gusts of wind.
The sidewall is made of thick PVC ab. 500 g/m2 canvas cover and a large leaded windows. The basic wall is 2m high. Thanks to its unique design, there is an option to add 1m or 0.5m to the side wall easily. With the windows placed on each two-meter segment, the tent looks aesthetically. It will be perfect as a trade, exhibition or a party tent.
The structure of the roof can be equipped with additional corner cantilevers, which help the main structure to hold the weight of snow.
The gate is made of rigid construction and PVC ab. 500 g/m2 canvas cover. It consists of two independent wings that can be slid sideways. Thanks to it the entrance is solid and more convenient to use.